Dirt Launch Powersports Front Shock Mount Gusset

Bolt on Front Shock Mount Gusset 

Bolt on gusset for added strength and a piece of mind when riding hard  

Can be used solely or in conjunction with the DLP Shock Brace 

Made of thick tig welded steel 

Clear Zinc Plated

This gusset is installed from the bottom of the frame tubes to help prevent shock mount frame failures 

All installation hardware is included 

Upgrade your factory upper and lower shock bolts to much stronger bolts by selecting the Bolt Upgrade option 

MADE IN THE U.S.A.

Dirt Launch Powersports Yamaha YXZ1000R Shock Tower Brace Installation Instructions

1. Remove the small hood plastic

2. Remove the plastic panel covering the shock tower 

3. Install the gusset by sliding the long end up through the frame from the bottom (Flat side facing forward) with the nut and bolt supplied. Note: use loctite or equivalent

1. Note: Some minor massaging may be required on the gussetdue to the chassis differences from factory 

4. Bolt upgrade option- (if selected in checkout)

1. Replace the oem upper and lower shock mounting bolts with the much stronger upgraded bolts. Reusing the oem nuts  

⚠WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov