{"product_id":"cfmoto-z10-motec-m1-plug-play-ecu-kit","title":"CF Moto Z10 MoTeC M1 Plug \u0026 Play ECU Kit","description":"\u003cp\u003e\u003cem\u003eComplete MoTeC M1 engine management kit for the 2026+ CF Moto Z10 turbo, with Beyond Redline firmware\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEach kit is built to order. Lead time is confirmed when your order is placed.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0733\/7436\/7898\/files\/Z10_M1_PnP_Data_Sheet.pdf?v=1794928707\"\u003eDownload the Data Sheet (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThis kit replaces the factory CF Moto Z10 ECU with a fully programmable MoTeC M1 ECU. A plug \u0026amp; play jumper harness connects to the factory ECU connectors, so no factory wires are cut. The ECU comes with Beyond Redline's M1 Build firmware pre-loaded, written specifically for the turbo Z10. The factory dash, drive mode switch and start button keep working the way they do from the factory, and you get full control of fuel, ignition, boost and throttle.\u003c\/p\u003e\n\u003ch3\u003eKit Options\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eM130 Kit – $4,699.00\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eM150 Kit – $5,499.00\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMoTeC M1 ECU (M130 or M150, depending on the kit you choose)\u003c\/li\u003e\n\u003cli\u003eBeyond Redline M1 Build firmware for the CF Moto Z10, pre-loaded and licensed to the included ECU\u003c\/li\u003e\n\u003cli\u003ePlug \u0026amp; play jumper harness (factory ECU connectors to MoTeC M1)\u003c\/li\u003e\n\u003cli\u003eAEM 3-channel ignition coil driver\u003c\/li\u003e\n\u003cli\u003eStartup calibration\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOptional Add-Ons\u003c\/h3\u003e\n\u003cp\u003eA wideband is highly recommended. These add-ons can be selected above. Choose either AEM X-Series option, or neither.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAEM X-Series inline wideband controller (30-0310) – $198.95\u003c\/strong\u003e: controller and sensor, no gauge. Sends air\/fuel ratio straight to the ECU.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAEM X-Series wideband gauge (30-0300) – $206.95\u003c\/strong\u003e: same wideband with a 52 mm air\/fuel gauge for the dash.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAiM infrared belt temperature sensor – $199.00\u003c\/strong\u003e (requires the M150 kit, or a CAN expander on the M130): lets the drive belt protection act on belt temperature.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFactory Features That Keep Working\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFactory dash: RPM, gear, drive mode, boost gauge and coolant temperature\u003c\/li\u003e\n\u003cli\u003eFactory drive mode switch (Comfort \/ Trail \/ Sport), remembered between key cycles\u003c\/li\u003e\n\u003cli\u003eFactory push-button start, with normal ECU power-down after key off\u003c\/li\u003e\n\u003cli\u003eFactory gear position and vehicle speed\u003c\/li\u003e\n\u003cli\u003eFactory drive-by-wire throttle and blow-off valve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance and Protection Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoost control\u003c\/strong\u003e – controls the factory electronic wastegate with adjustable boost targets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmooth throttle\u003c\/strong\u003e – adjustable throttle smoothing for each drive mode to take the jerk out of on\/off throttle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnti-lag\u003c\/strong\u003e – keeps the turbo spooled off throttle, with built-in temperature shutdowns and limits\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFaster boost build\u003c\/strong\u003e – throttle spool feature to help bring boost in sooner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaunch control\u003c\/strong\u003e and adjustable rev limits\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrive belt protection\u003c\/strong\u003e – limits rpm under heavy load at low speed in High gear, or when belt temperature gets too high (optional belt temperature sensor; requires the M150 kit or a CAN expander on the M130)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverboost protection\u003c\/strong\u003e – cuts fuel if boost goes past a safe limit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling fan control\u003c\/strong\u003e – runs the fan on coolant temperature and can also use intake air temperature\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWideband support\u003c\/strong\u003e – works with AEM X-Series wideband controllers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eData logging\u003c\/strong\u003e – full MoTeC data logging and i2 analysis\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChoosing an ECU: M130 or M150\u003c\/h3\u003e\n\u003cp\u003eBoth kits run every feature listed above.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eM130\u003c\/strong\u003e – works, but has almost no room left for extra sensors or outputs. Adding the belt temperature sensor needs a CAN expander.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eM150\u003c\/strong\u003e – choose this if you plan to add sensors, gauges or other outputs later. It has room for add-ons like the optional belt temperature sensor, with no CAN expander needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRequirements and Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFirmware is pre-loaded and licensed to the ECU in this kit. The license is not transferable to another ECU.\u003c\/li\u003e\n\u003cli\u003eLaptop with MoTeC M1 Tune for tuning and i2 for viewing logs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuning support:\u003c\/strong\u003e Like any engine management system, the MoTeC M1 takes knowledge and experience to get the best results. We're happy to answer technical questions, but this kit does not include unlimited tuning support. We can quote tuning for your setup, refer you to a tuner in your area, or quote training if you'd like to tune it yourself.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompetition \/ off-road use only.\u003c\/strong\u003e This ECU kit is for closed-course competition and off-road vehicles only. It does not meet federal emissions requirements.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2026+ CF Moto Z10\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eQuestions? Contact Beyond Redline: 1-888-498-1223  |  \u003ca href=\"https:\/\/www.beyondredline.com\"\u003ewww.beyondredline.com\u003c\/a\u003e\u003c\/p\u003e\n","brand":"Dirt Launch Powersports","offers":[{"title":"M130 Kit \/ None \/ None","offer_id":68273744871578,"sku":"DLP-CF-03-001-M130","price":4699.0,"currency_code":"USD","in_stock":true},{"title":"M130 Kit \/ AEM 30-0310 Inline Controller (+$198.95) \/ None","offer_id":68273785405594,"sku":"DLP-CF-03-001-M130-WB0310","price":4897.95,"currency_code":"USD","in_stock":true},{"title":"M130 Kit \/ AEM 30-0300 Gauge (+$206.95) \/ None","offer_id":68273785438362,"sku":"DLP-CF-03-001-M130-WB0300","price":4905.95,"currency_code":"USD","in_stock":true},{"title":"M130 Kit \/ None \/ AiM Infrared Belt Temp Sensor (+$199.00)","offer_id":68273785471130,"sku":"DLP-CF-03-001-M130-BT","price":4898.0,"currency_code":"USD","in_stock":true},{"title":"M130 Kit \/ AEM 30-0310 Inline Controller (+$198.95) \/ AiM Infrared Belt Temp Sensor (+$199.00)","offer_id":68273785503898,"sku":"DLP-CF-03-001-M130-WB0310-BT","price":5096.95,"currency_code":"USD","in_stock":true},{"title":"M130 Kit \/ AEM 30-0300 Gauge (+$206.95) \/ AiM Infrared Belt Temp Sensor (+$199.00)","offer_id":68273785536666,"sku":"DLP-CF-03-001-M130-WB0300-BT","price":5104.95,"currency_code":"USD","in_stock":true},{"title":"M150 Kit \/ None \/ None","offer_id":68273744904346,"sku":"DLP-CF-03-001-M150","price":5499.0,"currency_code":"USD","in_stock":true},{"title":"M150 Kit \/ AEM 30-0310 Inline Controller (+$198.95) \/ None","offer_id":68273785569434,"sku":"DLP-CF-03-001-M150-WB0310","price":5697.95,"currency_code":"USD","in_stock":true},{"title":"M150 Kit \/ AEM 30-0300 Gauge (+$206.95) \/ None","offer_id":68273785602202,"sku":"DLP-CF-03-001-M150-WB0300","price":5705.95,"currency_code":"USD","in_stock":true},{"title":"M150 Kit \/ None \/ AiM Infrared Belt Temp Sensor (+$199.00)","offer_id":68273785634970,"sku":"DLP-CF-03-001-M150-BT","price":5698.0,"currency_code":"USD","in_stock":true},{"title":"M150 Kit \/ AEM 30-0310 Inline Controller (+$198.95) \/ AiM Infrared Belt Temp Sensor (+$199.00)","offer_id":68273785667738,"sku":"DLP-CF-03-001-M150-WB0310-BT","price":5896.95,"currency_code":"USD","in_stock":true},{"title":"M150 Kit \/ AEM 30-0300 Gauge (+$206.95) \/ AiM Infrared Belt Temp Sensor (+$199.00)","offer_id":68273785700506,"sku":"DLP-CF-03-001-M150-WB0300-BT","price":5904.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/7436\/7898\/files\/motec-m130-ecu.jpg?v=1794928761","url":"https:\/\/www.dirtlaunchpowersports.com\/products\/cfmoto-z10-motec-m1-plug-play-ecu-kit","provider":"Dirt Launch Powersports","version":"1.0","type":"link"}