Yamaha YXZ1000 Lean Angle Sensor Delete -Dirt Launch Powersports

Don't let a faulty lean angle sensor end your race.

The factory Yamaha YXZ1000R lean angle sensor is designed to shut the engine off during a tip-over or rollover event. While this feature can be beneficial for recreational driving, it can become a liability in racing environments where every second counts.

The Dirt Launch Powersports Lean Angle Sensor Delete Module replaces the factory sensor and prevents unwanted engine shutdowns caused by lean angle sensor activation or sensor failure.

Featuring a simple plug-and-play installation, this module connects directly to the factory wiring harness and can be installed in minutes without cutting or modifying the vehicle's wiring.

Whether you're racing short course, hill climbs, desert events, or other closed-course competitions, this module helps eliminate the risk of a lean angle sensor costing you valuable track position.

Features:

• Replaces the factory Yamaha YXZ lean angle sensor
• Prevents unwanted engine shutdowns during racing
• Eliminates failures caused by faulty lean angle sensors
• Plug-and-play installation
• No cutting or wiring modifications required
• Compact and lightweight design
• Designed for competition use

Installation:

1. Locate the factory lean angle sensor behind the battery in the center console.
2. Remove the sensor connector.
3. Plug in the DLP Lean Angle Sensor Delete Module.
4. Remove the factory sensor if desired.

Important Safety Notice:

• Intended for closed-course competition use only.
• Safety personnel should be present during operation.
• If the vehicle rolls completely upside down, the ignition should be switched off immediately, as the engine may continue running.

Fitment:

• Yamaha YXZ1000R

⚠WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov