ย
Stage 1 and Stage 2 DLP use the same base kit. Stage 2 addsย injectors and boost control. You can select your setup directly from the dropdown when ordering.
You can also upgrade later without replacing your system. You only add whatโs needed.
Built Around the Core System
This kit is designed as a complete system.
From tuning to airflow to fueling, everything is built to work together so the car runs correctly under load.
Each kit is flashed on your factory Yamaha ECU using in-house tuning developed through Beyond Redline Performance.
No piggyback controllers.
Stage 1 Setup
Stage 1 is a complete bolt-on turbo system designed for a stock Yamaha YXZ.
- Approx. 150 rear wheel horsepower
- Fast spool with strong mid-range power
- Maintains drivability
- Built for trail, dunes, and hard use
Stage 2 (Select in Dropdown or Upgrade Later)
- Adds Injector Dynamics 1050cc injectors
- Adds electronic boost control
- Increases boost and overall performance
Up to ~200 RWHP - Stage 2 is tuned for a stock engine on 91 octane minimum, including high boost.
If you are planning for more power, this setup can also be paired with upgraded engine internals. That allows you to step into Stage 3 later with a larger turbo and updated tuning.
Select Stage 2 in the dropdown, or start with Stage 1 and upgrade later by adding only the required components.
Built to Grow (Stage 3 Ready)
This system is designed to scale.
The DLP Stage 3 Turbo Kit uses the same core system. The difference is the turbo and supporting mods.
No need to replace the kit.
Whatโs Included
- Fully tuned ECU (no piggyback systems required)
- Garrett GBC Club Line Turbocharger with fast spool characteristics
- Stainless turbo manifold and downpipe
- Large air-to-air intercooler with SPAL fan (tested to 400+ hp)
- Intake piping with Donaldson filter system
- TiAL wastegate actuator
- All oil, coolant lines, and necessary fittings
- Made in the USA components built in Green Bay
Stage 2 Required Upgrades
- Shimless valve buckets (In Drop down)
- Clutch upgrade (In Drop down)
Fitment
Fits: Yamaha YXZ 2019-2025 (bolt-on).
2016-2018 models require stronger connecting rods.
Why This Kit
Most turbo kits focus on individual parts. This one focuses on the complete system.
From tuning to airflow to reliability, everything is designed to work together. That is why this kit is used in real race applications and trusted by teams that depend on consistent performance.
What you actually pay
DLP Stage 1 complete: about $5,434.98
- $5,399.99 kit, including the factory ECU flash tune and downpipe
- Plus $34.99 air-injection delete if needed
Typical competitor base kit: lists at $4,305.99, but the parts needed to complete a similar setup add up to about $5,331.98 before any exhaust, or about $6,500+ with a dual exhaust.
- Base kit: $4,305.99
- Loaded Power Vision with dual 3-bar MAP sensors: $899.99
- Air-injection block-off: $46.00
- Throttle body brackets: $45.00 + $35.00
- Optional dual exhaust: $1,210.00
Competitor prices from their public website as of November 2026; check current pricing.
Why DLP
- Factory ECU flash (no piggyback) with elevation compensation
- Stage 2 (~200 RWHP) and Stage 3 (up to ~270 RWHP) on 91 octane pump gas
- Downpipe included
- Made in Green Bay
- In-house install available
Green Bay Installation
Dirt Launch Powersports installs its kits in-house at 1220 Winford Ave, Green Bay, WI.
- A typical install takes 6โ12 hours. A Stage 3 engine build takes longer.
- Shop hours: MondayโFriday 8:30 AMโ5 PM CT
- Call 920-498-1223 to book, or use our contact page.
Installation (current Gen 2 kit):
Stage 1 Turbo Installation Instructions - Gen 2 (2019-2025)
Gen 1 kits (sold before 2024):
2016-2018 Turbo Kit (Gen 1)
2019-2023 Turbo Kit (Gen 1)
Watch it run